| Customization: | Available |
|---|---|
| Type: | Pet Cleaning Products |
| Cleaning Products Type: | Body Brush |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Order number | Surveillance project | Technical requirement | Result | Single judgment |
| 1 | surface quality | Theinnerandoutersurfacesshall besmooth,withoutfolding,cracking,stratification, Groundwelding,arcbreaking,burningwear,andother defectswhosedepth exceedsthewall thicknessdeviation. | accord with |
qualified
|
| 2 | Appearance quality of galvanized coating | The surface of galvanized components should be uniform, uniform and complete, and the plating parts should have no defects such as leakage plating; There should be no run-off, drips or excess clumps on the surface | accord with | qualified |
| 3 | Galvanized coating attachment | The zinc layer of the galvanized component should be firmly combined with the base metal, and after the adhesion test, the zinc layer will not peel and not protrude | accord with | qualified |
| 4 | Galvanized coating thickness | The average thickness of galvanized layer should be ≥84μm |
105 μm
|
qualified |
| 6 | Galvanized coating for salt spray corrosion resistance | After 168h neutral salt spray test, there should be no red rust on galvanized components. | accord with | qualified |
| 7 | yield strength |
≥235MPa
|
360Mpa | qualified |
| 8 | tensile strength |
≥375MPa
|
476Mpa | qualified |
| 9 | After breaking the extension length |
≥26%
|
33.6 %
|
qualified |
| 10 | resistance to shock | After 5J impact test according to GB/T1732-2020 test standard, the outer coating at the impact site has no cracks, wrinkles and spalling. | accord with | qualified |
| 11 | Strength and durability | a) All parts are not broken or cracked; b) Lift and press some parts that should be firm by hand without permanent loosening; c) All parts should have no wear or deformation affecting the use of the function; d) Hardware connectors should not be loose; e) The moving parts (doors, drawers, etc.) should be easily opened and closed; f) parts have no significant displacement change; g) The change value of shelf bending deflection ≤0.5%; h) Maximum deflection of top plate and bottom plate ≤0.5%; |
accord with | qualified |
| 12 | Electrical safety performancerequirements | The continuity of the protective grounding circuit of the electrical equipment shall comply with the specified requirements of GB/T5226.1-2019. The insulation resistance shall comply with the specified requirements of GB/T5226.1-2019. The voltage should meet the requirements of GB/T5226.1-2019. The electrical system is safe and reliable, sensitive and accurate, and should have grounding devices and safety signs. |
accord with | qualified |
| 13 | Surface temperature rise | There should be no leakage, and the temperature rise of the shell surface should not be greater than 35ºC | accord with | qualified |
| 14 | Cleaning pass rate | The qualified rate of cleaning should not be less than 99.9%. | 99.7% | qualified |
| 15 | Protection function | Water undertemperature protection Water, gas under pressure protection Mechanical failure overload protection |
accord with | qualified |
| 16 | noise | The noise value of the cleaning machine during the load operation shall not be greater than 82dB(A) |
65dB (A )
|
qualified |
| 17 | move | The operation of the cleaning machine should be stable, coordinated action, no abnormal sound and no blocking phenomenon. | accord with | qualified |
){kind=link}